Mi-T-M MH-0400-0M10
Double tap to zoom
Kerosene Forced Air Portable Heaters MH-0400-0M10
Share
Features
Motor: Heavy-duty, high quality cast aluminum enclosed electric motor
Burner Head: 1-piece cast aluminum
Components: Built-in temperature control thermostat with control dial · High performance fan · Integral overheat and flame-out safety · Fuel gauge · Sure start ignition for cold temperature starts · Dual connector ignition
Factory tested for multiple fuels: Kerosene · JP8/Jet A fuel · No. 1 or No. 2 fuel oil · No. 1 or No. 2 diesel fuel
Important Notes:
· Not for use in residential living areas or inadequately ventilated areas.
· Proper ventilation required during operation.
· Must be plugged into an approved standard electrical outlet for operation.
Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.
Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.
Specifications
Heat Output | 400,000 BTU |
Hot-Air Flow | 1,400 CFM |
Air Pump Pressure | 125 PSI |
AC Power | 120V, 60Hz, 3.0 Amps |
Motor Size | 1/2 HP |
Fuel Tank Capacity | 24.0 gallons |
Fuel Consumption | |
Heating Area | 10,000 sq ft. |
Multi-Fuel Capable | Yes |
Digital Temp. Read-Out | Yes |
Error Indicator Rear-Out | Yes |
Parts Storage System | Yes |
Weights & Dimensions | |
Net Weight | 150 lbs. |
Shipping Weight | 159 lbs. |
Length | 53 in. |
Width | 30 in. |
Height | 36 in. |
© 2014 - 2025 All Rights Reserved. Site by: AM EquipmentLocator.com
Home | Company Profile | Sitemap | Privacy | Terms